Inkalum
We would like to take this opportunity to introduce ourselves as one of the
aluminium extrusion manufacturer in Indonesia.
PT. INKASA JAYA ALUMINIUM was established in Nov 2013
PT. INKASA JAYA ALUMINIUM is 100% an Indonesian owened company
PT. INKASA JAYA ALUMINIUM plant has the following state of the art
facilities and services:
20 unit latest aluminium extrusion pressess
3 unit of smelting furnaces
Anodizing and powder coating finished facilities
In house die designers, technicians and engineers and also die makers
Finishes for Aluminium Extruded Products:
Mill Finish
Natural aluminium finish of the extrusion press no futher anodizing or coloring process.
Natural Anodizing
By means of eletro-chemical process natural oxide-film will be formed and thickened considerably on the metal surface. The aluminium extrusion is then sealed in hot deionized- water which closes of the pores and permanently seals the oxide film imparting to the metal surface the extreme hardness, corrosion and wear resistance of the oxide. INKASA Natural Anodize finish conform to International Standard and is available in nominal film thickness 5, 10, 18 and 25 microns.
For normal and severe atmosphere condition, film thicknss from 10 to 25
microns repectively should be recommended.
Color Finish
In the INKASA color process, inorganic metal color particles are deposited and fixed electronically at the very base of the pores of anodic film allowing virtually full thickness of the anodic film to protect them.
The aluminium extrusion is then sealed in hot deionozed water which closes of pores and permanently seals in the color particles.
